Overview
Plastic hanger is mainly used in ABS plastic molding. The chemical name ABS is acrylonitrile butadiene styrene copolymer.
Shape classification
Plastic hanger style is divided into two categories, one is flat and has a long shelf body, as well as the relatively narrow cross-section of the shoulder frame and gantry tilt small slope, its shape and lightweight thin, lightweight clothing more suitable for drying. While the other is just the opposite with the former, short wide body aircraft. Large frame tilt slope shoulders and the width thick, thick totally styling, more appropriate day to hang heavier clothing.
Raw materials and process
Plastic hangers currently used mainly PP, PS, KR, ABS is the most common plastic hanger materials. Molding: Molding preparation, feeding, plastics, filling, packing, reflux, cooled mold.
Plastic hanger maintenance tips as follows:
1. hung in heavy, try to disperse hanging open, not concentrated in one place, in order to avoid hanging rod deformation.
2. Do not allow the use of the process within the knotted rope hand loose, so as not to affect the life of the rope.
3. Possible low viscosity lubricant coated wire rope and pulley, but not sticky with oils and lubricants.
The rope always clean dust, dirt will increase the resistance pulleys, rope making and reduce friction and increase the service life of the rope.
Plastic hanger style classified as follows:
Plastic hanger style is divided into two categories, one is flat and has a long shelf body, as well as the relatively narrow cross-section of the shoulder frame and gantry tilt small slope, its shape and lightweight thin, lightweight clothing more suitable for drying.
While the other is just the opposite with the former, short wide body aircraft. Large frame tilt slope shoulders and the width thick, thick totally styling, more appropriate day to hang heavier clothing.